迷你偏摆测量仪

主要用于精密轴类零件径向跳动误差,用两顶尖定位轴类零件,转动被测零件,测针探测在零件圆柱面上,直接读取杠杆表径跳动误差。

Mini-pendulum measuring instrument

It is mainly used for radial run-out error of precision axle parts. Two pins are used to locate axle parts, rotate the measured parts, and probe the cylindrical surface of the parts. The run-out error of lever gauge diameter is read directly.

特点

1、 采用精密钢制顶尖, 可选配钨钢顶尖,耐磨。

2、 配备高精度表座,可以精密微调,保证测量精度。

3、顶尖座及导轨面采用球墨铸铁,耐磨,不易变形。

4、滑座采用快速锁紧(已申请专利),双方向位置锁紧重复定位精度≤0.002。

5、可选配表座滑台带导轨螺杆移动型,适合多截面快速测量。

 

 

Characteristic:

1. Precision steel apex is adopted. Tungsten steel apex can be selected for wear resistance.

2. Equipped with a high-precision table, it can be fine-tuned precisely to ensure the measurement accuracy.

3. Nodular cast iron is used for the top seat and guide rail surface, which is wear-resistant and not easy to deform.

4. The slider adopts fast locking (patented), and the repetitive positioning accuracy of two-way position locking is less than 0.002.

5. Optional sliding table with guide rail screw movable type, suitable for multi-section rapid measurement.

 

迷你偏摆测量仪

偏摆测量仪主要用于检测轴类、盘类零件的径向、圆跳动和端面跳动。同时对具有中心孔的带轴内外啮合圆柱齿轮、圆锥齿轮、蜗轮和蜗杆的齿圈径向跳动和端面跳动进行测定(如果被测齿不带轴,可订制具有中心孔的芯轴),也可对其有中心孔的圆柱和圆锥的径向跳动和端面跳动进行测定。

 

Mini-pendulum measuring instrument

The pendulum measuring instrument is mainly used to detect radial, circular and end run-out of shaft and disk parts. At the same time, the radial run-out and end run-out of ring teeth of cylindrical gears, bevel gears, worm gears and worm with inner and outer engagement with central hole are measured (if the measured teeth do not have a shaft, the core shaft with central hole can be customized), and the radial run-out and end run-out of cylinder and cone with central hole can also be measured.

 

 

偏摆仪

规格(mm)

Deflection

instrument

Specifications

中心高度

(mm)

Center height

测量直径

(mm)

Measuring diameter

精度(um)

Accuracy

平行方向

Parallel direction

垂直方向

Vertical direction

130

35

60

3

3

200

35

60

3

3

300

35

60

4

4

 

 


  • 类型 :